Download Firmware Software T.V56.03

 Download Firmware Software T.V56.03 

All resolution codes 

Firmware-Software Update T.V.56.03 Download all resolution codes for LCD/LED for free. The T.V56.03 is a complete universal board for LCD and LED televisions. The T.V56.03 board has a headphone jack, USB input, PC input, VGA input, HDMI input, and component input, among other features. Different countries use the TV56.03 universal boards.


Basic Information PCB Board: T.V56.03

Model No: T.V56.03

Main Chip: TSUMV56RUU-Z1

Resolution Supported UP To 1920 X 1200 to Panel LCD/LED TV

Screen Supported: Up 14” to 32” Panel LED & LCD

Panel Voltage DC: +3.3V, +5V, +12V

Main AC Power Supply: 220 V

HDMI Input: 1 Port

USB Input: 1 Port

VGA Input: 1 Port

PC Input & Audio / Video: Yes

IR Control: Yes (Remote Control)

Key Button Functions: VOL+/VOL-, Source/Power/CH-/CH+/MENU

Input & Output Ports: AV, Earphone Out, HDMI, USB, RF TV interface, and VGA

Headphone: Yes

RF TV: 1 Port

Component Input: Yes

Multi-Language: Yes

USB Port Upgrade: YES


Service Code: T.V56.03

The service model allows you to change the board’s internal parameters or unlock the factory code, Resolution Code, etc


Through the remote, enter the numeric code. Menu+1147

Boot Logo Setting: T.V56.03

Put your logo onto the USB disk.

Connect your U disk with the main board.

Find your logo in a multimedia file.

Select your logo.

Press No. 6 on the remote control to change to full-screen play, then press OK on the remote control. On the bottom of the option items, there is a "catch"; choose it and done.

How to download and install firmware.

1. To download the required firmware, click on the Download Button given below the table.

2. When the download is completed, the file will be stored in your PC download folder.

3. Copy the firmware file into an empty USB drive. Make sure the USB has no other data.

4. Plug the USB into the LED/LCD main board USB port.

5. Switch ON the LED TV power and wait until the LCD/LED flashing stops or the LED IR is working speedily.

6. When the LED IR stops flashing, remove the USB from the TV LCD/LED board.

7. Note: Do this process fast; otherwise, it will not work.



Sr.NoDescriptionDownload Link
1T.V56.03.-1024X768Download
2T.V56.03-1280X1024Download
3T.V56.03-1366X768Download
4T.V56.03-1440X900Download
5T.V56.03-1600X900Download
6T.V56.03-1600X1200Download
7T.V56.03-1680X1050Download
8T.V56.03-1920X1080Download
9T.V56.03-1920X1200Download
google-playkhamsatmostaqltradent