Five Circumstances in Which Resetting Your Router May Help It Function Better
Occasionally, it is a good idea to reset your router to its original configuration. It can help you fix issues, strengthen your connection, or even improve security. We will go over a few situations in this post where you might need to reset your device entirely. It is an easy procedure that you can perform on any router that you own.
Please be aware that a reboot and a reset are not the same thing. In the former case, you put the device back to its original settings after purchasing it. Simply turning it off and back on is all that is required for the latter. Thus, a reset is a more thorough procedure, but it will erase all of your settings.
When is the right time to reset your router?
Resetting a router usually involves pressing a tiny button on the rear of the device. You only need to hold it for a few seconds. By doing this, the settings will be fully reset.
You can not remember your password.
For the first time, you might need to reset your router if you can not remember your password. You discover that you do not know the password when you attempt to access the settings. Additionally, you will not be able to access your Wi-Fi network since you can not remember the password you changed.
You must return your router to its initial configuration in order to recover control. But, since leaving the factory password in place is not advised, it is crucial to change it again later.
The update has been halted.
It is critical to keep your router updated. We advise doing this, and you should always make sure the most recent firmware is installed. But occasionally issues may occur, leading to the device malfunctioning or even ceasing to function.
Resetting your router is worth doing once more to fix this problem. Using the original firmware version, you can restore it to its factory settings and then carry out this update procedure once more, making sure to do it correctly this time.
Having issues with the connection
It can also be helpful, of course, if you are having trouble connecting, such as if you notice that your Wi-Fi is slow, that there is a lot of interference, that you are not getting good stability, etc. Although there are numerous causes for these issues, occasionally the only way to fix them is to return your device to its original configuration.
But it is crucial to go over some fundamentals again, like where the router is, how to check for interference, whether you are using the wrong frequency, etc.
Detection of hacks
Another possibility is that your network is infiltrated by hackers. You are aware that they have gained access to your Wi-Fi network and may have changed its configuration. Your devices might be malfunctioning as a result, and unless you fix the problem, some might not be able to reconnect to the network.
Your router may need to be fully reset in order to fix these issues. By doing this, you can avoid security problems and configure everything from scratch.
You wish to restore everything to its initial configuration.
Lastly, if all you want to do is go back to the factory settings, that is another reason. You can lower the risk by returning your router to its default settings, for instance, if you decide to sell it and do not want to keep any data or settings you made on it.
The Wi-Fi name you set, the password you changed, whether you enabled traffic priority, etc., will all be cleared as a result.
These are a few reasons why you might need to reset your router, to put it briefly. It is a useful tool for enhancing network security and performance.